Wright Hydraulics
From tender to final claim · Australia-wide

Estimating and project advisory for commercial plumbing contractors

Senior-level expertise, without the full-time overhead. Tender estimates, take-offs, cost planning and project advice from Wesley Wright, a licensed plumber who's priced, run and built the jobs. Priced from your drawings and specs, so jobs are taken on Australia-wide.

Send your drawings See a sample package
17 years
across plumbing, site supervision, estimating, project management and construction management
Licensed plumber
NSW Lic. 309150C. On the tools and on site before ever pricing a job.
1 business day
to a fixed-fee proposal once your documents are in
Who it's for

Commercial plumbing contractors, from one-crew outfits to tier 1

Outsourced estimating and project advice, used for the tenders and jobs you need help with. An estimator when you need one, not another wage. No retainer, no lock-in. It suits:

  • Large contractors with an estimating teamExtra capacity when three tenders close in the same week, priced so you can see where every dollar sits: cost by service, work phase and zone, with labour hours and crew days.
  • Small and medium contractorsWithout a dedicated estimator, or with one who's already flat out.
  • Regional contractorsBigger commercial work, without building an office to price it.
  • Contractors stepping up to bigger jobsYour first big commercial job, with advice from someone who's run them: scope, risk, programme, crewing and procurement.
Services

What's on offer

All services and fees →

Estimating

Fixed fee, agreed before work starts
01

Full tender estimate

The whole hydraulic package, priced with your labour, plant and supplier rates and your margins, and checked before it leaves. Fixed fee.

  • Take-off marked up on the PDF drawings, with a legend on every sheet
  • Bill of quantities priced line by line, including the items that aren't drawn
  • Tender summary with escalation, margin and contingency shown openly
  • Scope of works: inclusions, exclusions, assumptions and qualifications
  • Tender queries (RFIs) ready for you to send out
  • Drawing register of every drawing and revision priced from
  • Materials schedule, with the items that need supplier pricing
  • Estimate reports and a resources schedule (labour, crew, plant)
  • A run-through call before you lodge
02

Take-offs and BOQs

The measure only, no pricing, for you to put your own rates against. Fixed fee.

  • Marked-up PDF drawings with a legend on every sheet
  • BOQ of every item by service, level, zone and work phase
  • Includes the items that aren't drawn
  • Excel copy to load into your own pricing

Project advisory and cost planning

Hourly, or a fixed fee for budget estimates
03

Project advisory

Help on live jobs and on tenders bigger than you usually take on, task by task, for as long as you need it. Hourly against an agreed estimate of hours, or priced once the work is reviewed.

  • Variations priced with the working shown
  • Addenda and design changes re-priced
  • Scope and risk review before you commit to a tender
  • Supplier quotes compared, procurement schedule
  • Programme, crewing and labour forecasting
  • Design and constructability review, marked up on the PDFs
  • Inspection and test plans (ITPs) drafted or reviewed
  • Procedures set up while you run the job
04

Cost planning

Budget estimates for the hydraulic services from concept or design drawings, cost comparisons of alternative systems and materials, and project budgets set up from the tender estimate. Fixed fee for budget estimates; comparisons and budgets hourly.

Hydraulic services covered

Every service on the hydraulic drawings

  • Drainage
  • Water
  • Gas and fire services
  • Fixtures and plant
  • Excavation and penetrations
  • General items

Measured and priced by work phase: in-ground, above-ground, rough-in, fit-off and commissioning. If it's on the hydraulic drawings or in the specification, it's in the estimate.

See everything covered →
Why Wright Hydraulics

More than just an estimate

Drawings don't show everything. I price every estimate the way the job gets built: access, sequencing, penetrations, the fittings nobody draws, and the labour it really takes.

  • Measured, not guessed. Every pipe, fitting, fixture and penetration is taken off the drawings and priced line by line. Nothing added as a percentage.
  • Commercially protected. Assumptions, inclusions and exclusions are written down, not left in someone's head.
  • Your rates, your margins. Priced with your labour, plant and supplier rates. Escalation, margin and contingency are shown openly, never buried in the rates.
  • One person, start to finish. You deal with me, Wesley Wright, and I do the take-off myself.
What you receive
Tender package
DocumentFormat
1. Tender Summary and ReportsPDF
2. Scope of Works and Tender QueriesPDF
3. Bill of Quantities, Collection Sheets and Cost BreakdownPDF
4. Materials SchedulePDF
5. Take-off Drawings and RegisterPDF
Estimate workbook: summary, BOQ, cost breakdown, materials and resourcesExcel
Five documents and an Excel workbookRev A, B, C…
See the sample tender package →
How it works

Four steps to a priced tender

The full process →
  1. 1

    Send your documents

    Drawings, specifications, addenda and the tender due date.

  2. 2

    Get a fixed fee

    A fee proposal within one business day, with the scope, timing and price agreed before any work starts.

  3. 3

    Set up your rates

    On your first job, your labour, material, plant and overhead rates and margins go into the estimating system, so the price is tailored to your business. After that they're ready for every job.

  4. 4

    Lodge your price

    The complete package ahead of your close, priced with your rates, and a call to run through it before you submit.

Tender coming up?

Send the drawings, specification and due date, and you'll have a fixed fee within one business day.

Send drawings wesley@wrighthydraulics.com.au